ZF6 Standalone Wiring Harness

The main function of the harness is to connect the following components:

• ZF 6 transmission (6hp26 or 6hp28)
• Shifter
• Engine ECU CANBus
• Plug in CANBus resistors

In addition, there is also:

• +12v, ground and ignition connections

Currently, the options available are for:

• 6hp26 or 6hp26x from either the E60 530d or E53 X5, combined with the shifter from the E53 X5
• 6hp28 or 6hp28x from either the E60 530d lci or the E70 X5, combined with the shifter for either

Note, we have not included provision for the reverse light activation (as it involves splicing into the shifter wiring) however we can provide instruction on how to add this to the 6hp26 shifter.

The loom has loosely been designed around Land Rover Defender fitment however it has been made with extra length so it can be used in a variety of applications such as Transit van swaps or other vehicles

Whilst every effort has been made to provide detailed instructions to make the loom as straightforward as possible to fit, it still relies on a reasonable working knowledge of vehicle electrics in order to find and safely connect to power and ground sources. We have included the fitting instructions below to aid your judgement.

Installation instructions: Click here