M57N and M57N2 to N57 8HP Adapter

Adapter plate to bolt the N57 8hp transmission to the M57N and M57N2.

This will enable you to do an 8 speed swap at the same time as your M57 engine conversion.

Set includes:

• Adapter plate
• Fixing Kit
• 4x Dowels
• 6x Torque converter bolts

To fit you will need to drill out the starter motor holes and bolt in from the engine side. This will involve positioning the starter using an 8mm dowel or drill bit from the adapter plate side.

You will need an N57 flex plate – part number 8506670. When fitting the N57 flex plate the crank dowel must be removed. Ensure that the Crank Position Sensor pick up ring does move out of position.

Fitting Instructions – click here